Climbing Talk
Quickdraws
Started by Rod
·
·
3 replies
Archived thread
Replies are closed. Some details, such as access rules and gate codes, may be out of date.
Rod - 9 Oct 2005
Seeking opinions on technique/safety. Assume ring bolt protection, an onsight at or above your limits and you don't know if the solution to the next part of the pitch is direct, left or right. Clip it in the wrong direction and you face dilemma of a the rope potentially opening the clip in the event of a fall.
Until this year i've gone the 2 draw solution where possible, untidy but generally effective.
This year I've started to clip the draw in what I think is the incorrect direction, passed the rope through the bottom part of the clip and then rotated that bottom part of the clip 180 degrees. Having live tested it, I think this solves the base problem of the rope being more likely to open the clip. However, I have only seen one other person use it and haven't spotted any technique tips specifically addressing it.
Can anyone see holes in the logic?
As a caveat to my descriptive, I learnt climbing in my current euro environment so i don't really know english terminology for climbing equipment. I've taken my best shot by using "quickdraw" which I think equates to the french term is "degaine".
jamie - 12 Oct 2005
?? it shouldnt really matter which way the draw is facing...if you clip correctly with the rope running from the rock face through the biner and out to you .. if you fall the rope shouldnt fall across the gate ...to do this it would have to wrap around the biner and you would have to be pretty unlucky for this to happen..
correct me if my thinking is flawed
Rod - 12 Oct 2005
g'day jamie, i'm trying to negate the possibility of the wrap around unclip without resorting to a locking biner. climbing situation illustrated in the petzl brochure (link below), left facing clip where, unforeseen, the solution finds you end up on the left side above the clip. rod.
http://www.petzl.com/petzl/SportNews?MotRecherche=Quick+Search&Langue=en&Activite=&Famille=&SousFamille=&News=116
steve - 14 Nov 2005
hey rod not sure if this helps, but if you are climbing generally left, make sure the biner spine is on the left (gate opens to the right), if the climb takes you in a right direction, make sure the biner spine is on the right.. if you fall the rope will slide closer to the spine and minimise the chance of the rope openning the biner.